Spare Parts
10-99-07 Cable 70"
Cable 70" includes cable, removable clevis and clevis pins. Length measured from fitting end to fitting end, do not include free cable when measuring.
10-99-08 Cable 50"
Cable 50" includes cable, removable clevis and clevis pins. Length measured from fitting end to fitting end, do not include free cable when measuring.
10-99-15 Heavy-Duty Plastic Blocker Plate w/ Screws
Blocker plate measures 6.5 x 24 inches. Made from 1/4 inch thick UHMW plastic it is shatter proof and wear resistant. Designed to be cut to size at install, it...
10-99-06 Bushing Kit for Flap Round
Kit includes 2 round bushings, 2 bolts and 6 nuts. Fits all GrassFlap models.
10-99-12 Deflector Angle
Deflector angle is 1 x 1 inch angle 14 inches long. It mounts at the top edge of the discharge opening sandwiched between the blocker plate and the hinge plate...
10-99-11 Flap Tension Spring
Flap Tension spring includes the spring, mounting bolt and nut.
10-99-36 Screws and T-Nuts (set of 8)
Set of 8 Screws and T-Nuts used to attach Heavy-Duty Plastic Blocker Plate to Hinge Plate.
10-99-21 Clevis Kit
Clevis Kit for Pedal end of pull cable. Fits 50 inch and 70 inch cables.
10-99-22 Clevis Pin (Flap End)
Clevis pin for Flap end of cable. Fits 50 inch and 70 inch cables.
10-99-18 Pedal Return Spring
Pedal Return Spring for use with SE, SEL and BE pedals.
10-99-37 Cable Connecting Hardware
Hardware includes: (1) 10-99-21 Clevis Kit (1) 10-99-22 Cleavis Pin (Flap End) (1) 10-99-28 Bushing Cable Pin Flap End (2) Cable Clamp & Screws
10-99-28 Bushing Cable Pin Flap End
Bushing for Clevis pin for Flap end of cable. Fits 50 inch and 70 inch cables. 1/4 OD x 3/16 ID x 1/4 long.
10-99-32 Bushing Spring Bolt
Bushing and bolt used to attach the flap spring to the flap.
10-99-35 SE Pedal Assembly
SE Pedal is designed for use when space below the foot deck is limited. The cable exits parallel to the foot deck. Used on most Stand-on mowers, front mount mowers...
10-99-02 Bushing Kit for Pedal Round
Bushing Kit includes 2 round bushings, bolt and nut. Fits all style pedals
10-99-13 RE Pedal Assembly
The RE Pedal is designed to mounted on a vertical surface. The cable exits out the back of the pedal. Pedal includes two slots in base for mounting. Used on most...
10-99-52 Bushing Kit for Flap Hex
Kit includes 2 hex bushings, 2 bolts and 6 nuts. Fits all GrassFlap models with hex shaped holes on hinge plate.
10-99-41 SEL Pedal Assembly
The SEL Pedal has the cable exit the pedal parallel to mounting surface and has an L shaped base for mounting. Used on most rider mowers.
10-99-01 BE Pedal Assembly
The BE Pedal is designed to mounted on a flat surface. The cable exits out the bottom of the pedal. Pedal includes two slots in base for mounting.
10-99-16 Heavy-duty Hinge Plate
Heavy-Duty Hinge Plate. Used with all GrassFlaps that start with GF3.