Ferris Hand Lever Mount + All Steel Blocker Assembly

Smarter Chute Blockers for Ferris Zero Turn Mowers

For homeowners, property managers, and professional lawn-care crews, mow quality is about more than just the cut. What also matters is controlling where clippings go. This affects:

• How clean the edges look

• How safely debris is managed

• How efficiently an operator can move around beds, driveways, sidewalks, fences, vehicles, and buildings

For operators of Ferris mowers, the way to get cleaner cuts is with a GrassFlap™ Ferris chute blocker with a hand lever mount along with an all-steel blocker assembly. 

Designed for select Ferris Brand Mowers, including Ferris mowers with iCD decks, this GrassFlap™ chute blocker setup gives operators a durable mechanical way to manage mower discharge. 

An example is our 41U2M50-H5L-B26 GrassFlap® brand chute blocker with Steel Blocker Plate and H5L Hand Lever. It includes: 

• Ferris deck no-drill mount

• Hand-lever with direct bolt mount

• Cable

• All-steel flap assembly

• Mounting hardware needed for installation

This chute blocker installation helps operators control grass clippings with precision and control.

What Is a Chute Blocker?

A chute blocker is an operator-controlled discharge chute accessory that helps manage where grass clippings and debris exit the mower deck. On zero-turn mowers, discharge control is necessary because operators often mow around tight areas, landscaped beds, sidewalks, parked vehicles, buildings, roadways, and neighboring properties.

GrassFlap™ chute blockers are operator-controlled discharge chute systems, often referred to as OCDC systems. Without a chute blocker, clippings discharge freely in every situation. With a chute blocker, the operator can close, open, or partially adjust the blocker depending on the mowing environment, controlling where clippings go. 

That can contribute to more than just cleanliness. Mower safety can come from controlling clippings that may otherwise go in the direction of people or property. For many operators, a chute blocker improves clipping control and reduces the mess that comes from uncontrolled side discharge.

A chute blocker is not a substitute for safe mowing practices, proper guards, or operator awareness.

Ferris Hand Lever Mount + All Steel Blocker Assembly

Direct bolt-on design, all-steel blocker plate, a plate that opens 180 degrees to clear the edge of the mower deck, and an adjustable partial-open position, are core features of our chute blockers for Ferris mowers. 

For operators searching for a Ferris mower chute blocker, Ferris iCD deck chute blocker, or hand lever chute blocker for zero turn mower, our design is specific to the Ferris deck fitment and operator control experience.

Why Discharge Control Matters

A blocker for mower discharge chutes ensures cleanliness and safety. Controlling the discharge of debris can protect flower beds, pools, other lawns, and more. 

Even after walking the mowing area to remove sticks and leaves before mowing, there may still be debris such as rocks that you missed. When closed, a blocker will keep anything in the grass from shooting out of the chute. 

Homeowners and professional crews alike benefit from chute blockers because of less cleanup time, better-looking finishes, and preventing debris from flying around. 

Built for Ferris Brand Mowers with iCD Decks

Ferris mowers are known for productivity, comfort, and suspension-focused mower design.

GrassFlap’s Ferris-specific unit is designed for Ferris mowers with iCD decks and includes the A12 (11-82-12) deck no-drill mount, which means no separate purchase is required for that mount on this product configuration.

That fitment matters because mower chute blockers are not one-size-fits-everything part. Operators should always verify compatibility for their mower by using the lookup tool: 

• Mower brand

• Deck size

• Deck style

• Control preference

Use our lookup tool to confirm the correct model for a specific mower.

Homeowner Benefits

For homeowners using Zero Turn Mowers, a GrassFlap™ Chute Blocker can make mowing feel more controlled and less frustrating.

Without a chute blocker, an operator may blow clippings into landscape beds, across walkways, onto fences, or into driveways.

With a chute blocker, an operator can close or partially adjust the blocker when approaching sensitive areas. 

The all-steel blocker plate also gives homeowners a durable option compared with lighter-duty solutions. The ability to open the blocker plate fully helps preserve maneuverability and deck clearance when the blocker is not needed.

Professional Lawn Care Benefits

For commercial operators, control translates into efficiency.

Professional mowing crews often move quickly across multiple properties in a day. They need accessories that can keep up with repeated use, variable mowing conditions, and different customer expectations. 

A durable chute blocker helps operators manage discharge eliminating the need to stop constantly to clean up blown clippings.

For crews, better discharge control supports a cleaner and more professional finish that keeps clients happy. 

Installation and Use Considerations

Operators should review the installation guide, confirm the mower key switch is in the off, and follow safe maintenance practices before working near the mower deck or discharge opening.

Before mowing, users should also inspect the mowing area, remove debris, and make sure the mower deck and chute are clear of buildup. Check mower decks and chute areas for grass, grease, leaves, and debris because buildup can contribute to breakdowns and fire hazards.

GrassFlap™ Ferris Hand Lever Mount + All Steel Blocker Assembly 

Before purchasing, verify fitment for your exact mower using GrassFlap’s product lookup or support resources. Always follow safe mowing and installation practices. A better cut starts with control and control starts at the discharge chute.