GrassFlap

Low Profile Flap mount used with all GrassFlaps that start with 42B. 

SE Pedal is designed for use when space below the foot deck is limited. The cable exits parallel to the foot deck. Used on most Stand-on mowers, fr...

Set of 8 Screws and T-Nuts used to attach Heavy-Duty Plastic Blocker Plate to Hinge Plate.

Hardware includes:   (1) 10-99-21 Clevis Kit (1) 10-99-22 Clevis Pin (Flap End) (1) 10-99-28 Bushing Cable Pin Flap End (2) Cable Clamp & Screws

Low Profile Flap Mount 8 inch for use with 44P, 45R & 46R GrassFlaps.  Mount only does not include mounting hardware. Overall length is 7 inches.

The SEL Pedal has the cable exit the pedal parallel to mounting surface and has an L shaped base for mounting.  Used on most rider mowers.

Hinge plate for Low Profile GrassFlaps. Used with all GrassFlaps that start with 44P or 412T. 

Raptor/Alpha Mount Plate with 4-1/2" tab. Used with low-profile 46R GrassFlaps.  Mounts to deck opening to form a straight opening to seal against.

Clevis Pin 1/4" diameter for Pedal end of pull cable. Fits the removable clevis. Fits 50 inch and 70 inch cables.

Low Profile Spring mount. Use Low Profile Flap mounts. Compatible with 51F.

Bushing Kit includes 2 hex bushings, bolt and nut. Fits all style pedals with hex shaped holes.

Kit includes 2 hex bushings, 2 bolts and 4 nuts. Fits all GrassFlap models with hex shaped holes on hinge plate.

The SEC Pedal has the cable exit the pedal parallel to mounting surface.  It is a combination of the SEL L shaped base for mounting and SE pedal pa...

Flap mount 12.  Designed to use with 11-82-28 no-drill mount.

Spacer 2.7 inch, 3/4 ID x 1-1/4 OD Aluminum. Use as needed to adjust height of flap mount. 

REQUIRES SEPARATE PURCHASE OF COMPLETE GRASSFLAP UNIT Hand Lever Upgrade This upgrade will replace standard foot pedal that is included in GrassFla...

The H2L hand lever is designed to mount on the side of the mowing tower to allow hand operations.  The cable exits out of the bottom of the assembl...

Hinge plate for 6BR/61E GrassFlaps. Used with all GrassFlaps that start with 6BR/61E. 

All Steel Blocker Plate for 6BR & 7BR GrassFlaps. Used with all GrassFlaps that start with 6BR & 7BR.

Flap mount 1186 includes the spring mount and is used as the front flap mount for GrassFlap units starting with 6BR.

Flap mount 1155 is used as the rear flap mount for GrassFlap units starting with 6BR/7BR.

The H3L hand lever is designed to mount on the side of the mowing tower to allow hand operations.  The cable exits out of the bottom of the assembl...

REQUIRES SEPARATE PURCHASE OF COMPLETE GRASSFLAP UNIT Hand Lever Upgrade This upgrade will replace standard foot pedal that is included in GrassFla...